The flotation machine is mainly used to separate gold, silver, copper, iron, lead, zinc, molybdenum, nickel, aluminum and other metal minerals. It can also be used for the selection of ferrous metals and non-metals. The machine is driven by the motor V-belt to drive the impeller to rotate, which generates a centrifugal action to form a negative pressure. On the one hand, it inhales sufficient air to mix with the pulp, on the other hand, it stirs the pulp into medicine and mixes it. Mineralized foam is formed on the pulp surface. Adjust the height of the gate to control the liquid level, so that the useful foam is scraped out by the scraper.
Instructions for the use of the flotation machine: Before starting the machine, check the bolts of all parts. Before starting the machine, manually rotate the pulley to prevent the sediment from accumulating and increasing the load of the motor. When working, the height of the gate should be carefully adjusted to keep the liquid level stable. The mineralized foam on the slurry surface is scraped into the launder. The impeller and the stator should maintain a certain distance, and should be replaced when worn, and the bearings in the pump should be maintained every three months.
Wearing parts: impeller, stator.
The flotation machine is driven by the motor V-belt to drive the impeller to rotate, which generates a centrifugal effect to form a negative pressure. On the one hand, sufficient air is inhaled to mix with the pulp, on the other hand, the pulp is mixed with the medicine, and the foam is refined at the same time, so that the mineral is bound on the foam. , float to the slurry surface and then form mineralized foam. Adjust the height of the gate to control the liquid level.
Performance and Advantages
1. Low operating cost: 1/3~1/2 electricity saving compared with conventional mechanical stirring flotation machine;
2. High separation accuracy and low ash content of clean coal: The ash content of clean coal can be reduced by 1~2% compared with the conventional mechanical stirring flotation machine;
3. Good flotation effect: It is equipped with liquid level automatic control and electric control device, and the degree of foam refinement is high, thereby improving the effect of flotation;
4. The wearing parts have strong durability: the impeller is always active in the machine, which plays a role in removing accumulated materials and debris, reducing the phenomenon of damage to parts due to debris; and the impeller of the stirring device is made of grinding rubber. to enhance the wear resistance;
The flotation machine is mainly used for sorting non-ferrous metals such as copper, zinc, lead, nickel, gold, etc. It can also be used for roughing and selection of ferrous metals and non-metals.
|Model||Volume||Cell size||Impeller Dia.||Impeller speed||Capacity||Power||Singe cell weight|
Besides, we also supply KYF flotation machine, GF flotation machine, BF flotation machine, if you are interested, please contact us for detailed information and best quotation.